Misc - M119

• COMB1 - Functional descriptions, model/equipment combinations
  • Select System . . . H19 Version of air intake hose (Model 140)
• COMB1 - General notes
  • Select System . . . A17 Notes on avoiding damage to ignition system B17 Notes on avoiding damage to ignition system - engine with CFI injection C17 Notes on avoiding damage to ignition system - engine with LH-SFIinjection
• COMB1 - Technical modifications
  • Select Modification . . . F17 LH-SFI variable reference resistor G17 Routing of cable of electronic accelerator (Model 124.036) H17 Bolts of exhaust manifold K17 Material of exhaust manifold M17 Exhaust manifold (Model 140 RHS) N17 Fit washer of air pump attachment O17 Material of air pump carrier P17 Material of air pump carrier A18 Spacer ring of belt pulley B18 Diameter of air pump belt pulley C18 High voltage distributor rotor with stiffening ribs D18 Bell crank of right-hand steering/left-hand steering standardized E18 Return spring between fulcrum lever and accelerator control lever F18 Locking element for accelerator pedal lever (Model 140)
• COMB1 - Testing
  • Select System . . . N15 Connection diagram of intake manifold (vacuum supply) B16 Routing of cable of electronic accelerator (Model 124.036) D16 Routing of cable of electronic accelerator (Model 124.034) E16 Tightening diagram for attaching intake manifold F16 Replacing intake manifold G16 Connection diagram of intake manifold J16 Replacing intake manifold K16 Replacing rivet nuts in exhaust manifold L16 Checking, adjusting clearance of camshaft position sensor/camshaft sprocket segment O16 Turning connecting rod, Bell crank of RHS/LHS standardized
• COMB2 - Functional descriptions, model/equipment combinations
  • Select System . . . B18 Survey of fuel pumps E18 Fuel Pump survey
• COMB2 - Modification note
  • Select System . . . B1 Removing and installing fuel tank E2 Removing and installing fuel level gauge sensor A4 Removing and installing activated charcoal canister C6 Removing, replacing, installing catalytic converter/front section of exhaust system L6 Removing and installing complete exhaust system
• COMB2 - Technical modifications
  • Select Modification . . . H17 Lever sender replaces immersed pipe sender J17 Screw spindle pump replaces double fuel pump unit N17 Activated charcoal filter enlarged (Model 140) O17 Catalytic converter coating modified P17 Exhaust manifold modified (Model 140 RHS)
• COMB2 - Testing
  • Select System . . . A15 Connecting diagram of evaporation emission control system (HFM-SFI Engine 104, 111) D15 " (HFM-SFI Engine 104, 111) E15 " (HFM-SFI Engine 104, 111) H15 " (HFM-SFI Engine 104, 111) K15 Connecting diagram of evaporative emission control system (Engine 112) L15 " (Engine 113) N15 " (Engine 112) O15 " (Engine 113) P15 " (Engine 113) A16 " (Engine 112) B16 " (Engine 111) C16 " (Engine 111) D16 " (LH-SFI Engine 119) G16 " (ME-SFI Engine 119) H16 " (Engine 119) J16 " (HFM-SFI Engine 111) K16 " (LH-SFI Engine 120) N16 " (ME-SFI Engine 120) F17 Replacing rivet nut in exhaust manifold

---